If you have deleted the boot partition of your hard disk drive by mistake and there is important data on it, Can it be restored? You can always restore partition and recover data using a free data recovery software like TestDisk. It is a free open source program and is very efficient.

TestDisk has been developed with the intention of restoring lost or mistakenly deleted partitions. The program repairs the partition table as well as the boot sector and also rewrites the Master Boot Record (MBR) if required. The most important thing is you can run it using a boot floppy, CD or a USB stick, this is important in cases like this, in which boot partitions are affected. Navigation in TestDisk takes is performed using the arrow keys. Actions are confirmed by pressing [Enter].

Features of Test Disk:

Fix partition table, recover deleted partition 

Recover FAT32 boot sector from its backup 

Rebuild FAT12/FAT16/FAT32 boot sector 

Fix FAT tables 

Rebuild NTFS boot sector 

Recover NTFS boot sector from its backup 

Fix MFT using MFT mirror 

Locate ext2/ext3 Backup Super Block 

Undelete files from FAT, NTFS and ext2 file system 

Copy files from deleted FAT, NTFS and ext2/ext3 partitions. 

Important: 

Actual changes to your hard disk are executed by the program only if you confirm with [Enter], [Y], and ‘OK’. With the option labeled ‘Proceed’, an analysis first takes place. The present status can and should be saved using the ‘Save’ button. 

TestDisk shows the hard disk info as CHS (Cylinders, Heads, Sectors) after a verification started with ‘Search’. This is followed by its total size in MB. What is important is the first character of the output line: ‘*’ means primary and active as boot partition, ‘P’ is primary but not bootable, ‘L’ is a logical drive, and ‘D’ indicates the partition has been deleted. Selected the deleted partition, place it on ‘P’ using the right/left-arrow keys and save with ‘Write’.

Did you forget the password to your windows Vista or XP computer? Or maybe you’re parents have parental controls enabled and you need to know the password to turn them off. Whatever you’re reason may be, hacking into windows XP and Vista is actually a relatively simple process.

Step 1: Go to ophcrack.sourceforge.net select which operating system you use (either XP or Vista; Windows 7 isn’t available yet) and download the ISO. After the download is complete burn the ISO to a CD.

Step 2: Restart your computer (with the CD in) and your computer should now boot from the live CD into a Linux environment.

Step 3: Ophcrack will automatically run as soon as the CD boots and now all you need to do is wait until Ophcrack has completely finished cracking the computer password(s). This process will take anywhere from 10 minutes to several hours depending on the strength of the password used to protect the computer.

screen shot

Step 4: Finally now that you know the computer password; reboot the computer, eject the CD and now you will have complete access.

That's it! Go ahead and try it for yourself. But as always, use this knowledge responsibly!

Friends, now u can use totally free internet with your zong sim..So just follow the following steps.

1. Go Write Msg Option
2.  Type your: Mobile Company Name, Mobile Model, Internet

And send Msg 131

3. Now save your setting
with code 1234

4. And than Go Internet setting profile
Edit: APN
Change your APN setting;

Type the following...

APN: Wapgw: 10.81.6.33

Use Free Internet & enjoy....Say it all with ZONG

Apple has release iPhone and iPod Touch firmware OS software version 3.0. The firmware 3.0 is a major update that adds tons of new features to the portable device. While all generations of original iPhone and iPhone 3G entitles to free upgrade to iPhone OS 3.0 software update, both 1st generation and 2nd generation iPod Touch 2G is required to pay $9.95 to upgrade to to OS 3.0.

Bypass and skip the payment to Apple. It’s obviously unfair practice by Apple towards iPod Touch, who properly do not incur recurring charges. Use the following guide on how to upgrade and update to iPod Touch OS 3.0 software update firmware for free without cost.

How to Upgrade or Update iPod Touch to OS 3.0 Firmware For Free

1. Download and install iTunes 8.2 or higher version.

2. Download iPod Touch 2G OS firmware 3.0 Apple Device Software Update

iPod2,1_3.0_7A341_Restore.ipsw or iPod Touch 1G OS firmware 3.0 Apple Device Software Update IPSW file, iPod1,1_3.0_7A341_Restore.ipsw via the iPhone OS 3.0 software update direct download links.

Note: If the downloaded file is in ZIP format (iPod2,1_3.0_7A341_Restore.zip) , then rename the extension from .zip to .ipsw. If the file name is been appended with .zip extension, such as iPod2,1_3.0_7A341_Restore.ipsw.zip, just remove the .zip off the filename.

If you encounter “an error occurred while processing your request” error message when attempting to download iPod Touch firmware, download the IPSW files from here (for 1st generation iPod Touch) or here (for 2nd generation iPod Touch).

• Plug in and connect the iPod Touch to computer.
• Run iTunes 8.2 or higher.
• Select the iPod Touch from Devices list.
• Optional but recommended, take a backup of the iPod in case of accidental file lost.
• Now there are two ways to update iPod Touch. For user who want to clean and fresh upgrade the iPod Touch, without retaining any existing songs, musics, videos, movies, apps and other media or data files on iPod Touch (mean you will be losing all files stored on iPod Touch), follows these steps:
• In Windows environment, press and hold Shift key and left click Restore.
• In Mac OS X system, press and hold Option key and left click Restore.

For user who want to retain and save everything that has been uploaded and stored on iPod Touch or ensure that the media is untouched (not losing any files), follow these steps instead:

On the iTunes main screen, there should be 2 options: “Check for update” and “Restore”.

 Click on Check for update.

A web page showing the iPod Touch OS firmware 3.0 features and offering option to buy for $9.99 will be loaded and shown. Click on Cancel.

iTunes will return to the previous iPod Touch main page. However, the “Check for update” option has now been change to “Update.

In Windows environment, press and hold Shift key and left click Update.

In Mac OS X system, press and hold Option key and left click Update.

Locate and select iPod Touch OS 3.0 Apple Device Software Update IPSW file downloaded in step above.

The update process will start. iPod may reboot a few times. Do not disconnect iPod Touch until iTunes has completed updating iPod Touch.

Once upgrading is done, the iPod Touch will be on OS firmware 3.0, for free without any cent been paid.

Optionally, if you have choose to restore iPod Tunes to firmware OS software 3.0 at factory default, iTunes will offer option to either create a new iPod or restore it from backup. For user already created a backup of iPod, just restore the date files to upgraded iPod Touch. 

Note: If there is an error when iTunes attempts to recognize iPod Touch, just unplug and plug the iPod back in again.

Recycle bin icon can be removed from desktop. See the following these steps.
Go to Start=> Run
Here you type " gpedit.msc "
Go to user configuration=> Administrative Templates=> Desktop=> Now double click on Remove Recycle bin from Desktop=> Change it not Configured to Enable
Then press " Apply " and " OK ".
Now go to desktop and look, your recycle bin icon has been removed from desktop.

Visitors, you can hide your files inside the picture with the help of this tutorial.

So let's start
First of all you need a Winrar softwere, which you can download on this below link.

Download Winrar

After downloading winrar, 

Step 1:

Right click on the desktop, go to NEW and make a Rar folder, now which you want to hide the file, keep in this folder ( Rar Folder ).

Step 2:

Now save a JPG Picture on the desktop,

Go to Start=> Run

Here you type " cmd " and press Enter

Now command prompt window will be open, Now we work in command prompt,

Type in command prompt " cd desktop " and press Enter,

Now type this command in command prompt window,

copy /b picturename.jpg + foldername.rar outputfilename.jpg

Now press Enter

Picturename.jpg ( that file which i save on the desktop )

Foldername.rar  ( that folder which in keep a file for hide inside the picture )

Outputfilename.jpg ( you keep any name of this folder Because our file will be hide inside of this pic )

Now our file has been hide inside of the picture,

If you want to bring back of this file so simply go to command prompt and type this command,

ren outputfilename.jpg outputfilename.rar

outputfilename.rar ( That folder name which in I keep a file )

and press Enter.

Now our file has been show.